Revolut Business
Pay via Revolut Business for even faster shipping

Panasonic T-Cap Heat Pumps

Our range of Panasonic T-Cap Heat Pumps are available with capacities of 3.0 to 16.0 kW

All in One

Additional Information

Benefits of the T-CAP All in One unit!
Aquarea T-CAP can work in extreme outdoor conditions as low as -28°C and warranty the capacity without back up heating down to -20°C. Ready to work at extreme outdoor conditions the H Generation T-CAP can produce water up to 60°C, expanding its possibilities for retrofit application.

  • Works at temperatures as low as -28°C
  • Constant capacity up to -20°C
  • Reduced installation costs
  • Reduced installation time and minimised installation errors
  • Easy remote controller to set up
  • Electrical connections at the front
  • Easier installation and maintenance
  • Remote controller functions (cooling mode activation possible by software. This activation can only be done by service partner)
 

THREE PHASE (Power to indoor)

  • 9 kW: KIT-AQC9HE8 (Heating and Cooling)
  • 12 kW: KIT-AQC12HE8 (Heating and Cooling)
  • 16 kW: KIT-AQC16HE8 (Heating and Cooling)

Benefits of the T-CAP All in One unit!
Aquarea T-CAP can work in extreme outdoor conditions as low as -28°C and warranty the capacity without back up heating down to -20°C. Ready to work at extreme outdoor conditions the H Generation T-CAP can produce water up to 60°C, expanding its possibilities for retrofit application.

  • Works at temperatures as low as -28°C
  • Constant capacity up to -20°C
  • Reduced installation costs
  • Reduced installation time and minimised installation errors
  • Easy remote controller to set up
  • Electrical connections at the front
  • Easier installation and maintenance
  • Remote controller functions (cooling mode activation possible by software. This activation can only be done by service partner)
 

SINGLE PHASE (Power to indoor)

  • 9 kW: KIT-AXC09HE5 (WH-ADC1216H6E5 + WH-UX09HE5) (Heating and Cooling)
  • 12 kW: KIT-AXC12HE5 (WH-ADC1216H6E5 + WH-UX12HE5) (Heating and Cooling)

THREE PHASE (Power to indoor)

  • 9 kW: KIT-AXC09HE8 (WH-ADC0916H9E8 + WH-UX09HE8) (Heating and Cooling)
  • 12 kW: KIT-AXC12HE8 (Heating and Cooling)
  • 16 kW: KIT-AXC16HE8 (WH-ADC0916H9E8 + WH-UX16HE8) (Heating and Cooling)

Bi‑bloc

Additional Information

The best for extreme outdoor conditions. Constant capacity at -20°C.
Aquarea T-CAP can work in extreme outdoor conditions as low as -28°C and warranty the capacity without back up heating down to 20°C.
Ready to work at extreme outdoor conditions the H Generation T-CAP can produce water up to 60°C, expanding its possibilities for retrofit application. H Generation is the quickest to install and easiest maintenance.

  • Very high energy savings A++
  • Simple installation & maintenance
  • Constant capacity up to -20°C
  • Water temperature up to 60°C
  • Special software for low consumption homes with minimum output temperature: 20°C
  • Works at temperatures as low as -28°C
  • Automatic Air purge valve
  • Display of the compressor frequency
 

SINGLE PHASE (Power to indoor)

  • 9 kW: KIT-WXC09H3E5 (Heating and Cooling)
  • 12 kW: KIT-WXC12H6E5 (Heating and Cooling)

THREE PHASE (Power to indoor)

  • 16 kW: KIT-WXC16H9E8 (Heating and Cooling)

The best for extreme outdoor conditions. Constant capacity at -20°C.
Aquarea T-CAP can work in extreme outdoor conditions as low as -28°C and warranty the capacity without back up heating down to 20°C.
Ready to work at extreme outdoor conditions the H Generation T-CAP can produce water up to 60°C, expanding its possibilities for retrofit application. H Generation is the quickest to install and easiest maintenance.

  • Very high energy savings A++
  • Noise reduction of 7dB is based on power level when heating mode
  • With Quite mode we can reach 10 ~ 12dB(A)
  • Constant capacity up to -20°C
  • Water temperature up to 60°C
  • Special software for low consumption homes with minimum output temperature: 20°C
  • Works at temperatures as low as -28°C
  • Display of the compressor frequency

Mono-Bloc

Additional Information

The MXC is ideal for residential properties which don’t have an external boiler and require a maintained capacity level.
T-CAP stands for Total Capacity. This line-up is able to maintain the same nominal capacity even at -15°C without the help of an electrical booster heater. T-CAP is also able to provide extremely high efficiency, regardless of the outside temperature or the water temperature. The MXC adapts well in an existing installation with a boiler backup, and in a new application with underfloor heating, low temperature radiators or even fan-coil heaters. This range can also be connected to a solar kit in order to increase efficiency and minimise the impact on the environment. Finally, it is possible to connect a thermostat for even better heating or cooling control and management.

  • Efficient control of room temperature based on the outdoor temperature, indoor temperature using the Aquarea Manager.
  • Optional Smartphone control
  • Range from 9 to 16 kW, Single and Three Phase
  • Maximum hydraulic module output temperature: 55°C
  • Works down to -20°C
  • Cooling temperature range 5–20°C

SINGLE PHASE

  • 9 kW: WH-MXC09H3E5 (Heating and Cooling)
  • 12 kW: WH-MXC12H6E5 (Heating and Cooling)

THREE PHASE

  • 9 kW: WH-MXC09H3E8 (Heating and Cooling)
  • 12 kW: WH-MXC12H9E8 (Heating and Cooling)
  • 16 kW: WH-MXC16H9E8 (Heating and Cooling)
Scroll to Top